Cold Weather Gear
The term protective clothing can apply to a vast array of PPE. Some garments, like disposable protective clothing protect products from contaminants while others protect employees from dangerous hazards. Stauffer carries a full range of protective clothing for a broad variety of hazards and applications.
Refine Results
11 Products
MFR No.318M6452T-YLNV
Overall, Bisley, freezer, hi-viz yellow/navy, Ansi Class E, 100 % polyester ripstop 300D with PU coating, 20.26 oz multi-layer insulation, water resistant, twin chest zip pockets, two front angled pockets, adjustable elastic shoulder straps with buckle closure, side leg vent zipper with snap closures, size small-6XL, 5 each per case, sold by the each
$127.85 / Each
107 In Stock
MFR No.343M6450X-YLNV
Jacket, Bisley, freezer, hi-viz yellow/navy, Ansi Type R Class 3, 100% polyester ripstop 300D with PU coating, 20.26 oz multi-layer insulation, water resistant, detachable insulated hood, waist and chest pockets, sleeve pen pocket, zipper closure, reflective X-back, rib cuffs with thumb opening, size Small-6XL, 5 each per case, sold by the each
Workers in extreme cold temperatures and cold storage workers face one of the toughest challenges - staying productive in the cold. The Bisley Extreme Cold Collection by PIP® was engineered with high-performance materials to provide advanced thermal protection against extreme cold climate hazards. Paired with a DuPont™ Sorona® Aura multi-layered insulation, this collection of jackets, bibs and coveralls will provide workers with warmth to maintain productivity and comfort.
Workers in extreme cold temperatures and cold storage workers face one of the toughest challenges - staying productive in the cold. The Bisley Extreme Cold Collection by PIP® was engineered with high-performance materials to provide advanced thermal protection against extreme cold climate hazards. Paired with a DuPont™ Sorona® Aura multi-layered insulation, this collection of jackets, bibs and coveralls will provide workers with warmth to maintain productivity and comfort.
$127.85 / Each
157 In Stock
MFR No.333-1740-OR
Jacket, Value bomber style with black trim, Class 3, Type R, waterproof polyester outer shell with taped seams, built-in quilted high loft poly-fil insulation, black knit waist band and cuff, 2" silver reflective tape, adjustable and detachable hideaway hood, 2 mic tabs, 5 pockets with radio and 2 pen pockets, hi-vis orange, available in sizes small-6XL, sold by the each
Ideal for roadway construction workers, survey crews, utility workers, railway and metro workers, and emergency response personnel.
Ideal for roadway construction workers, survey crews, utility workers, railway and metro workers, and emergency response personnel.
$41.90 / Each
Ships in 6 - 8 days
MFR No.344M6453X-ORNV
Coverall, Bisley, freezer, hi-viz orange/navy, ANSI Type R Class 3, 100% polyester ripstop 300D with PU coating, 20.26 oz multi-layer insulation, water resistant, detachable insulated hood, double-layered knees, twin chest pockets with flap closure, tow front angled pockets, long side leg vent with zipper and press snap closure, rib cuffs with thumb opening, reflective X-back, size small-4XL, 5 each per case, sold by the each
$196.65 / Each
Ships in 7 - 9 days
MFR No.344M6453X-YLNV
Coverall, Bisley, freezer, hi-viz yellow/navy, ANSI Type R Class 3, 100% polyester ripstop 300D with PU coating, 20.26 oz multi-layer insulation, water resistant, detachable insulated hood, double-layered knees, twin chest pockets with flap closure, tow front angled pockets, long side leg vent with zipper and press snap closure, rib cuffs with thumb opening, reflective X-back, size small-4XL, 5 each per case, sold by the each
$196.65 / Each
Ships in 7 - 9 days
MFR No.343M6450X-ORNV
Jacket, Bisley, freezer, hi-viz orange/navy, ANSI Type R Class 3, 100% polyester ripstop 300D with PU coating, 20.26 oz multi-layer insulation, water resistant, detachable insulated hood, waist and chest pockets, sleeve pen pocket, zipper closure, reflective X-back, rib cuffs with thumb opening, size small-5XL, 5 each per case, sold by the each
$127.85 / Each
Ships in 7 - 9 days
MFR No.6475
Coveralls, insulated, freezer, N-Ferno 6475, navy, rated at 2.59 CLO, for use in temperatures ranging from -10 degrees F to -50 degrees F, water-resistant PU coating, 100% ripstop polyester shell, 200g 3M Thinsulate, 100% polyester fleece on collar, full-length zippers on each leg, zippered chest pocket, 2 lower front pockets, pen holder, rib knit cuffs, reflective accents for enhanced visibility, mic tab, 2 d-rings for convenient access, machine washable, size extra small-5XL
PRODUCT DESCRIPTION N-Ferno 6475 Insulated Freezer Coveralls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated coveralls stand up against the harshest conditions to provide warmth without restricting movement and dexterity. These insulated coveralls feature a zippered chest pocket, two lower exterior oversized pockets, pen/stylus holder, mic tab and 2 d-rings for convenient access and storage. A snap closure with zippers on each leg make it easy to pull on and take off without removing work boots. A dual button closure on the bottom of the pants makes for an adjustable fit to accommodate varying heights and to ensure pants won?t drag on the floor. A zippered closure with snap storm flap and ribbed knit cuffs help to seal out cold air. Reflective piping and hi-vis yellow material keeps wearers safe and seen. A size label is visible on the arm sleeve for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, these winter coveralls traps heat for warmth in extreme cold from -10F to s -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and also has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6475 Insulated Freezer Coveralls has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as snowmobiling or ice fishing.
PRODUCT DESCRIPTION N-Ferno 6475 Insulated Freezer Coveralls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated coveralls stand up against the harshest conditions to provide warmth without restricting movement and dexterity. These insulated coveralls feature a zippered chest pocket, two lower exterior oversized pockets, pen/stylus holder, mic tab and 2 d-rings for convenient access and storage. A snap closure with zippers on each leg make it easy to pull on and take off without removing work boots. A dual button closure on the bottom of the pants makes for an adjustable fit to accommodate varying heights and to ensure pants won?t drag on the floor. A zippered closure with snap storm flap and ribbed knit cuffs help to seal out cold air. Reflective piping and hi-vis yellow material keeps wearers safe and seen. A size label is visible on the arm sleeve for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, these winter coveralls traps heat for warmth in extreme cold from -10F to s -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and also has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6475 Insulated Freezer Coveralls has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as snowmobiling or ice fishing.
$196.58 / Each
Ships in 6 - 8 days
MFR No.6476
Jacket, insulated, freezer, N-Ferno 6476, navy, rated at 2.59 CLO, for use in temperatures ranging from -10 degrees F to -50 degrees F, water-resistant PU coating, 100% ripstop polyester shell, 200g 3M Thinsulate, 100% polyester fleece on collar, 2 lower front pockets, pen holder, rib knit cuffs, reflective accents for enhanced visibility, mic tab, 2 d-rings for convenient access, machine washable, size extra small-5XL
PRODUCT DESCRIPTION The N-Ferno 6476 Insulated Freezer Jacket is built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, this cooler jacket stands up against the harshest conditions to provide warmth without restricting movement and dexterity. This insulated work jacket features two lower exterior oversized pockets, pen/stylus holder, mic tab and 2 d-rings for convenient access and storage. A zippered closure with snap storm flap and ribbed knit cuffs help seal out cold air. Reflective piping and hi-vis yellow material keeps wearers safe and seen while on the job. A size label is visible on the arm sleeve for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, this jacket traps heat for warmth in extreme cold, ranging from -10F to -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6476 Insulated Cooler Jacket has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as hiking or snowmobiling.
PRODUCT DESCRIPTION The N-Ferno 6476 Insulated Freezer Jacket is built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, this cooler jacket stands up against the harshest conditions to provide warmth without restricting movement and dexterity. This insulated work jacket features two lower exterior oversized pockets, pen/stylus holder, mic tab and 2 d-rings for convenient access and storage. A zippered closure with snap storm flap and ribbed knit cuffs help seal out cold air. Reflective piping and hi-vis yellow material keeps wearers safe and seen while on the job. A size label is visible on the arm sleeve for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, this jacket traps heat for warmth in extreme cold, ranging from -10F to -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6476 Insulated Cooler Jacket has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as hiking or snowmobiling.
$99.92 / Each
Ships in 6 - 8 days
MFR No.6477
Bib overalls, insulated, freezer, N-Ferno 6477, navy, rated at 2.59 CLO, for use in temperatures ranging from -10 degrees F to -50 degrees F, water-resistant PU coating, 100% ripstop polyester shell, 200g 3M Thinsulate, 100% polyester fleece on collar, full-length zippers on each leg, 2 lower front pockets, reflective accents for enhanced visibility, machine washable, size extra small-5XL
PRODUCT DESCRIPTION N-Ferno 6477 Insulated Freezer Bib Overalls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated bibs stand up against the harshest conditions to provide warmth without restricting movement and dexterity. These work bibs have 2 oversized side pockets for easy access when wearing gloves. A snap closure with zippers on each leg make it easy to pull on and take off without removing work boots. A dual button closure on the bottom of the pants makes for an adjustable fit to accommodate varying heights and to ensure pants won?t drag on the floor. Four-way stretch sides enhance comfort where you need it, and adjustable elastic straps make for a custom fit. Reflective piping and hi-vis yellow material keeps wearers safe and seen. A size label is visible on the front of the bibs for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, these bibs traps heat for warmth in extreme cold, ranging from -10F to -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and also has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6477 Insulated Cooler Bib Overalls has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as hiking or snowmobiling.
PRODUCT DESCRIPTION N-Ferno 6477 Insulated Freezer Bib Overalls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated bibs stand up against the harshest conditions to provide warmth without restricting movement and dexterity. These work bibs have 2 oversized side pockets for easy access when wearing gloves. A snap closure with zippers on each leg make it easy to pull on and take off without removing work boots. A dual button closure on the bottom of the pants makes for an adjustable fit to accommodate varying heights and to ensure pants won?t drag on the floor. Four-way stretch sides enhance comfort where you need it, and adjustable elastic straps make for a custom fit. Reflective piping and hi-vis yellow material keeps wearers safe and seen. A size label is visible on the front of the bibs for easy viewing when being hung up or stored. 3M? THINSULATE? INSULATION Designed with 200g of 3M? Thinsulate? insulation, these bibs traps heat for warmth in extreme cold, ranging from -10F to -50F (-23C to -46C). The 3M Thinsulate is 30% thinner in profile compared to standard poly fill and also has a higher loft design, making it condense at a much slower rate and offers more thermal retention than standard poly fill?increasing its life integrity. Minimized washing will extend the overall life of the thermal, insulated garment. CLO RATINGS Insulation performance is measured by CLO ratings?which is a unit of thermal resistance that indicates insulating ability. The higher the CLO value, the higher the amount of warmth a piece of clothing provides. To determine temperature ratings, CLO factors, Metabolic Equivalent of Task (MET) and the time or duration of a task are considered. MET levels can be categorized as light activities (forklift driver, equipment operator), moderate activities (picking & packaging, delivery drivers) and vigorous activities (concrete work, tower climber). N-Ferno 6477 Insulated Cooler Bib Overalls has a CLO rating of 2.59 and is rated at a moderate work level in -50F // -46C temperatures for up to 5 hours (rated up to a full 8-hour workday at -45F // -43C). Ideal for those working in cold storage facilities, whether in a cooler or freezer room. Also designed for outdoor workers in any industry, from construction to mining and outdoor recreational activities such as hiking or snowmobiling.
$128.25 / Each
Ships in 6 - 8 days
MFR No.399-HG20
Heated glove liners, one size, battery charge time of 2-2.5 hours, black, extended cuffs, low/medium/high temperature ranges, machine washable, 36 pairs per case
$99.76 / Pair
Ships in 7 - 9 days
1
MFR No.300-HV100
Heated vest, one size, black, baselayer, low/medium/high temperature ranges, machine washable, includes battery operated remote control and initial battery, 12 each per case
$149.90 / Each
Ships in 7 - 9 days
1