Accessories
A fall hazard is any hazard in the workspace that could cause an accidental loss of balance or control, resulting in a fall. Stauffer partners with top suppliers to obtain expert level knowledge on fall protections systems.
Refine Results
46 Products
MFR No.17D-1/
Carabiner, steel, 1" gate opening, with automatic twist lock, approximate 4.5"X2.5", ANSI Z359-2007 Compliant, 1 each per case
$57.20 / Each
1 In Stock
1
MFR No.FS813-LOOP
Extender, 1 D-ring and 1 soft loop at other end, 18" length, 1.75 polyester webbing, 310 lb weight capacity, meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32, sold by the each
$29.50 / Each
Ships in 6 - 8 days
1
MFR No.2000041
Carabiner, self-closing/locking gate, steel, 2-1/8"opening, gate rated for 3600-lbs, ANSI Z359-2007 Compliant, sold by the each
$167.44 / Each
Ships in 8 - 10 days
1
MFR No.1500004
D-Ring attachment, 0.5" X 2.25", 2 lb. capacity, 100 each per case
$296.95 / Pack
Ships in 8 - 10 days
1
MFR No.1002005
Tie off adaptor, polyester construction, 5' long, pass-thru type, steel hardware, yellow, sold by the each
$98.33 / Each
Ships in 8 - 10 days
1
MFR No.9058/15FTBK
Ladder, 15' Aerial Lift, Self Rescue
$347.93 / Each
Ships in 7 - 9 days
1
MFR No.2108410
Anchor, fixed beam clamp, steel and aluminum construction, installs onto 12" to 36" wide I-beam flange up to 1/2" to 2 1/2" thickness, swiveling D-ring tie-off point, tightens using a built-in adjustment handle, sold by the each
$1,013.09 / Each
Ships in 8 - 10 days
1
MFR No.2100066
Bolt kit, replacement bolts for existing concrete D-ring anchors, installs into 11/16" - 18mm - or 3/4" concrete hole, steel and aluminum, 10 each per pack, one pack per case
$518.00 / Case
Ships in 8 - 10 days
1
MFR No.2100193
Cable, tie off adaptor, 6' (1.8m), 3/8" galvanized steel, pass-thru/choker type, high strength steel 0-ring, compact and lightweight design, silver, sold by the each
$87.29 / Each
Ships in 8 - 10 days
1
MFR No.10089209
Carabiner, steel, 2.1" gate opening, meets ANSI Z359 standard, 3600-lb gate strength in any direction, overall length is 4 inches (8 cm), auto-locking with pin
MSA offers a wide variety of carabiners for almost every application. All carabiners have a minimum breaking strength of 5,000 lbs/22,24 kN.
MSA offers a wide variety of carabiners for almost every application. All carabiners have a minimum breaking strength of 5,000 lbs/22,24 kN.
$85.94 / Each
Ships in 5 - 7 days
1
$43.77 / Each
Ships in 5 - 7 days
1
MFR No.1500009
D-Ring attachment with cord loop, Python Safety, 5 lb. capacity, 10 per pack, sold by the pack
$63.34 / Pack
Ships in 8 - 10 days
1
MFR No.1500005
D-Ring attachment, Python Safety, 0.5" X 2.25", non-conductive, 2 lb. capacity, 10 each per pack, sold by the pack
$63.34 / Pack
Ships in 8 - 10 days
1
MFR No.9403
Umbrella, vinyl, yellow, deluxe, 84" diameter, collapses to 6" diameter
$440.32 / Each
Ships in 5 - 7 days
1
MFR No.1500178
Hard hat lanyard, coil tether, stretched: 34", relaxed 4", hard hat not included, 10 per pack
$155.66 / Pack
Ships in 8 - 10 days
1
MFR No.1500019
Heat shrink, 0.75" X 1.75", reduce in size by 200% when heat is applied, for use with DBI-Sala Quick Wrap tape for tool fall protection, 25 each per pack
$42.42 / Pack
Ships in 8 - 10 days
1
MFR No.1500022
Heat shrink, 2.00" X 4.00", reduce in size by 200% when heat is applied, for use with DBI-Sala Quick Wrap tape for tool fall protection, tools not included, 10 each per pack
$82.13 / Pack
Ships in 8 - 10 days
1